Leatherworking Tools - Leather Hand Tools at Standing Bear\'s Trading Post,
Located in the San Fernando Valley of Los Angeles County,
Shipping nationwide.... If you need it shipped just let us know!
To order or for other information about the leathercraft supplies and leather working tools we offer
Located in the San Fernando Valley of Los Angeles County,
Shipping nationwide.... If you need it shipped just let us know!
To order or for other information about the leathercraft supplies and leather working tools we offer
please e-mail us at: [email protected]
or Call us at 818-342-9120
We are open 6 days a week Mon - Sat 10AM-6PM (1PM-9PM Eastern Time)
We are located at 7624 Tampa Avenue, Reseda, CA. 91335
(On Tampa Just north of Saticoy, Dead Center between the 101 and 118 Freeways)
Selling Leathercraft Supplies and Teaching People How To Use Them Since 1999
Custom Leather For 30+ Years!
Connect with us on the social networks:
Custom Leather For 30+ Years!
Connect with us on the social networks:
In an attempt to better serve our customers Standing Bear\'s Trading Post conducts all ordering via phone and e-mail.
We are authorized distributors for many different suppliers
Items listed on the website are items we can get from these suppliers
We are authorized distributors for many different suppliers
Items listed on the website are items we can get from these suppliers
& may not be stocked in store at all times.
Leather Tools - Carving Stamping Accessories ~ Leather Punching - Cutting Pads Leather cutting accesories
Top of the Page
To order or for other information about the leatherworking tools, please e-mail us at: [email protected] or Call us at 818-342-9120 Monday Through Saturday 10am - 6pm |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rawhide Mallet 11 oz 3300-04 Made of water buffalo rawhide on a contoured wooden handle. |
Poly-Head Mallet Medium 3301-03 Polymer heads resist wear and protect your tools, too! Medium mallet head size is 3-3/8" x 1-3/4". |
|
Wooden Mallet 8 oz 3446-00 9" handle with 1 1/2" x 4" head. |
Pro Poly Mallet The base construction is steel. with a contoured stacked leather handle Flat head mallet is 7-3/4" long. 35061-01 Flat Head 1 lb. |
|
Poly Maul 3302-00
This tapered poly maul has a minimal bounce, the contoured handle reduces shock and fatigue when working for long periods on leathercraft projects. Length is 9-3/4" long.16 oz. |
Craftool® Bakelite Mallet 3308-00 Rugged and durable Bakelite Mallet with a smooth wooden handle. Handle is 8-3/4" long with a 3-1/2" tall head. |
|
|
Top of the Page To order or for other information about leathercraft mauls and mallets, please e-mail us at: [email protected] or Call us at 818-342-9120 Monday Through Saturday 10am - 6pm |
||
| Leather Tools - Leather Hand Tools | ||
Quartz Slab for Leather Tooling 32228-00 Many leathercrafters refer to this as a marble for tooling but it is not granite or marble but instead quartz The quartz slab provides a solid foundation for tooling leather, or underneath a Poly/Poundo Board when using leather punches. Color could vary. Measures 12" x 12" x 1-3/16"
|
||
Adjustable Creaser 8072-00 For parallel lines, inside borders, decorative work and more. Adjusts quickly from a fine line to 5/16" wide. |
Measure right angles quickly and accurately. Ideal for laying out patterns. 12" x 8". |
|
Plastic Bone Folder 8116-00 $7.99 Functions as a small creaser, large creaser, folder, edge burnisher, and slicking stick. 6" x 3/4". |
Circle Edge Slicker 812200 2-1/8" diameter nylon tool gives leather smooth, finished edges. Works quickly and easily. |
|
Craftool Pro Leather Burnisher 83025-00 This sturdy little burnisher will help you smooth out the creases in your leather project and throw its weight into making creases. Tipping the scales at 1-1/3 lbs., this burnisher will be a staple in your workshop. 4-1/2" x 1-3/4" |
Wood Slickers These 2" diameter slickers for burnishing a smooth polished edge on your projects. Use by hand or adapt to an electric drill for faster results. Choose from single 1/8" (3 mm) groove.or double grooved, with 1/16" and 1/8" (2 and 3 mm) grooves, 8121-01 Single 
8121-02 Double 
|
|
Multi-Size Wood Slicker 8121-00 You’ll love this tool for burnishing your projects. This tool is ideal for those small curved areas that are often hard to reach. You have four width choices and a long handle to make your burnishing easier. Either end of the tool can be used for pushing out leather when doing carving with embossing. |
||
|
Top of the Page To order or for other information about leather work supplies, please e-mail us at: [email protected] or Call us at 818-342-9120 Monday Through Saturday 10am - 6pm |
||
| Edge Bevelers - Tools for Beveling edges of leather - Leathercraft tools | ||
Edge Beveler Sz 2 ~ 807602 Bevels and rounds off edges of leather. Available in five sizes. The larger the number, the wider the bevel.
Edge Beveler Sz 3 ~ 807603 Bevels and rounds off edges of leather. Available in five sizes. The larger the number, the wider the bevel
Edge Beveler Sz 4 ~ 807604 Bevels and rounds off edges of leather. Available in five sizes. The larger the number, the wider the bevel.
Edge Beveler Sz 5 ~ 807605 Bevels and rounds off edges of leather. Available in five sizes. The larger the number, the wider the bevel. |
Keen Edge Beveler 126 Sz. 2 8077-02 A true belt maker\'s favorite. Excellent for trimming and rounding edges. Size 2 for lightweight leather. 
Keen Edge Beveler 126 Sz. 3 8077-03 A true belt maker\'s favorite. Excellent for trimming and rounding edges. Size 3 for medium weight leather. 
Keen Edge Beveler 126 Sz. 4 8077-04 A true belt maker\'s favorite.Excellent for trimming and rounding edges. Size 4 for heavyweight leather. |
|
|
Top of the Page To order or for other information about the edge bevelers, edgers and other leathercraft supplies, please e-mail us at: [email protected] or Call us at 818-342-9120 Monday Through Saturday 10am - 6pm |
||
| Overstitch - Embossing Tool for leather - Leather Embossing Tool | ||
Overstitch Wheel System 8091-00 $29.99 One handle, 3 interchangeable spacing/overstitch wheels and a small screwdriver make this a handy addition to your tool collection. Wheel sizes are 5, 6 and 7 holes per inch. (Optional embossing wheels 809101-809105 designed to fit this handle are sold separately.) |
Embossing Wheels ~ 1/4" Wheels designed to fit overstitch and embossing wheel handle 8091-00 (sold seperately) These wheels are listed individually below. |
|
Embossing Wheel 8091-01 Great for fast and easy borders! For use on cased vegetable tanned leather.1/4" wheels designed to fit Overstitch and Embossing Wheel Handle 809100 (sold separately). 
Embossing Wheel 8091-05 Great for fast and easy borders! For use on cased vegetable tanned leather.1/4" wheels designed to fit Overstitch and Embossing Wheel Handle 809100 (sold separately). |
Embossing Wheel 8091-13 Great for fast and easy borders! For use on cased vegetable tanned leather.1/4" wheels designed to fit Overstitch and Embossing Wheel Handle 809100 (sold separately). . 
Embossing Wheel 8091-14 Great for fast and easy borders! For use on cased vegetable tanned leather.1/4" wheels designed to fit Overstitch and Embossing Wheel Handle 809100 (sold separately). 
Embossing Wheel 8091-16 Great for fast and easy borders! For use on cased vegetable tanned leather.1/4" wheels designed to fit Overstitch and Embossing Wheel Handle 809100 (sold separately). |
|
Top of the Page
To order or for other information about the leather embossing tools, please e-mail us at: [email protected] or
Call us at 818-342-9120 Monday Through Saturday 10am - 6pm
Leather Stitching and Lacing Tool |
|
|
Overstich Wheel Set - Spacer Set Comes with four removable spacing-overstitch wheels in the most popular sizes: 5, 6, 7 and 8 holes per 1" (25 mm). Optional embossing wheels designed to fit this handle are shown in the Stamping Tools section of this Buyers’ Guide. 8091-00 |
Craftaid® Stitching Guide Setting up stitching holes is a breeze with this new Craftaid®. The durable, plastic template will provide years of use while allowing you to easily transfer patterns for all your stitching needs, including straight lines, curves and corners. Offers you the choice of 5, 6, 7 or 8 stitches per inch (25 mm). 76633-00 |
Sewing Awl Kit Includes one spool of thread, one heavy needle, wrench and instructions. Needle and wrench are stored in the hollow handle. Sews a lockstitch just “like a machine.” 1216-00 |
Lacing/Stitching Fid Stretch and enlarge holes in leather for thick lace or thread. It can be sharpened if needed. An indispensable tool that all leathercrafters should have. 3056-00 |
Scratch Awl Used to mark patterns and scribe lines. Sharp 2-1/2" (64 mm) blade, hardwood handle and brass ferrule. 3217-00 |
Beeswax Used for filling cracks, edges, lacing and waxing thread. 1 oz. block 2014-00 |
Pro Stitching Groover Set This product design makes perfect sense. Unlike most groovers, this blade is on the same axis as the handle, providing better control and downward pressure on the blade. The chuck easily locks the blade firmly in place. More than just a groover, it also comes with a small modeling spoon for creasing or decorative borders. Blade included. Groove width adjusts from 1/16" to 1-5/16" (2 to 33 mm). 88081-00 |
4-in-1 Awl Set Deluxe set features a hardwood handle and four styles of interchangeable blades Includes two awl blades, one lacing fid blade and one scratch awl blade. Size #2 Awl Blade 2-3/8" Size #3 Awl Blade 2-3/8" Scratch Awl Blade 2-5/16" Lacing Fid Blade 2-3/8" 3209-00 |
Adjustable Groover Designed to measure and gouge grooves in one step. Width adjusts from 1/16" to 3/4" (2 to 19 mm). Hardwood handle and metal ferrule. 8074-00 |
Freehand Stitching Groover This groover has no guide. You can cut grooves, straight or curved, anywhere on your project, not just along the edge. 88074-11 |
Saddlemaker’s Groover Just loosen the chuck with your fingers, position the blade and re-tighten. No extra tools needed to adjust the blade. Make a clean groove from 1/16" to 1-3/8" (2 to 35 mm) from edge. Blade included. 8069-00 
Saddlemaker’s Groover Blade 8070-00 |
Pro Hand Stitching Groover Get your hands on the best freestyle groover available. The large handle makes it so easy to push this sharp groover to create recessed lines for hand stitching. The blade and ferrule are stainless steel. Creates a U-shaped groove. 83003-00 |
Adjustable “V” Gouge Ideal for gouging fold lines and more. Adjusts to any depth in seconds. Contoured wood handle. 31811-00 |
Adjustable “V” Gouge The perfect tool for making sharp folds in box-type handbags, briefcases and more. Adjusts to any depth in seconds, easy to control and handle. Die cast. 1-1/2" x 2-3/4" x 3/4" (38 x 70 x 19 mm). 8082-00 |
Stitching Awl with Blade Features a hardwood handle and a permanently fixed 1-1/4" (32 mm) blade. 31218-01 |
Pro Stitching Awl This precision-made awl fits perfectly in your grip to help you work your leather at the best angle. Features a wood handle with a permanently fixed 1-1/4" (32 mm) diamond-shaped, steel blade. 83020-00 |
Flat-Side Awl Haft Blade not included, Sold Seperately Features a flat-side hardwood handle to decrease slippage in your hand during use. The flat side also prevents the awl from rolling off of your workbench. Choose any of the five blades below for interchangeable use. The solid brass chuck screws down tight so you can lock your blade securely. Handle is 2-3/4" (79 mm) long. 3318-01 Awl Blades Made from forged steel, these quality blades will provide years of service. Insert into the haft above and you’re ready to go. 3319-01 1-1/2" (38 mm) Straight Stabbing 3319-05 1-1/4" (32 mm) Diamond (s) 3319-06 1-1/2" (38 mm) Diamond (m) |
Wood handle designed to fit comfortably in the palm of your hand.
Knurled stainless-steel chuck makes it easy to tighten manually and firmly holds your blades in place while working any weight of leather. Holds all Craftool® Pro Diamond Awl Blades, Measures 4" 83021-00 Pro Diamond Awl Blades These diamond-shaped blades are specially designed to fit in the Craftool® Pro Awl Haft. They fit securely in the haft to create a clean hole that will sew well while providing a professional look. These are sharp and ready to use. 
83022-01 Small 1-1/8" 83022-02 Medium 1-3/8" 83022-03 Large 1-5/8" 83022-04 Straight 1-1/2" 83022-05 Curved 1-1/2" |
Wing Divider Plots and measures curves. Set screw locks into position. Ideal for scribing arcs, gauging and dividing lines. 6" (152 mm) long and up to 4-3/8" (111 mm) span. 3607-00 |
Curved Stitching Awl This precision-made awl with a curved diamond-shaped blade is a necessity for sewing round-shaped items or when joining two pieces of leather on a flat or bowed surface. Features a stainless-steel ferrule and wood handle with a permanently fixed 1-1/2" (38.1 mm) curved steel blade. The awl handle has two flat sides that will provide a better grip while holding at an angle. This will help you produce more consistent stitches for a more uniform and professional look. Tool length is 5-3/4" (146 mm). 83020-01 |
Awl Block (Tools shown NOT Included) Keep your awl blades organized and safely stored in this durable cork block. Can also be used for needles and other sharp instruments. 4" x 4" x 1-3/8" 3216-00 |
Pro Burnishing Awl This 4-1/2" (114 mm) awl is designed to widen and/or burnish holes in your projects. The point is very sharp and is tapered for a wide variety of hole sizes. Use to make holes in thinner leather and scratch cutting guidelines. 3218-00 |
The Original Stitching Horse This model has a wooden “turn-key” that requires little effort to hold and release your project. 2-1/4" jaws are covered in leather to prevent scarring of your projects. Built with hardwood. The 3-13/16" wide by 16-5/8" long base provides plenty to sit on to ensure a firm and stable work station. The clamp is 14-3/4" tall Base swivels to provide the ability to change working angle. Heavy-duty hardware is included, some assembly required. 3133-00 |
Lacing and Stitching Pony Finish projects faster using our lacing pony. Holds the item firmly in place so you can use both hands for lacing or sewing. Lacing pony stands 15-1/2" (394 mm) tall with thumbscrew to securely hold projects in its 3" (76 mm) grip. 3132-00 |
Poly Roller Tool
This durable roller is perfect to flatten your hand lacing for a professional, finished look. Can also be used to help transfer Craftaids® and help crease folds in leather during project construction. The hardwood handle is 3-1/2" long with a 1-3/8" wide poly roller. 8080-00 |
|
|
To order or for other information about our leathercraft supplies , please e-mail us at: [email protected] or
Call us at 818-342-9120 Monday Through Saturday 10am - 6pm Top |
|
To order or for other information about our leatherwork supplies , please e-mail us at: [email protected] or
Call us at 818-342-9120 Monday Through Saturday 10am - 6pm
Top
Call us at 818-342-9120 Monday Through Saturday 10am - 6pm
Top
Leather Punches - Leatherwork Punches
|
|
Craftool Pro Rotary Punch - Leather Rotary Punch 3230 Hand-forged, solid steel, known world wide for durability and performance. The only rotary punch you will ever need. Includes tubes 0-1-2-3-4 and 6 in sizes 5/64" to 3/16". |
4-In-1 Punch Tube 3053-00 Replacement tubes for 3052-00 |
Deluxe Rotary Punch - Leather Rotary Punch 3240 Features strong steel body, brass anvil, non-slip handle grips and adjustable, locking wheel. Threaded steel punch tubes can be replaced when damaged or dull (3798-10, -11, -12, -13, -14, -15, -16). |
Hand Sewing Punch - Leather Punch 3229-00 Anyone that works with lightweight leather will want to add this unique tool to their workshop. Punches clean holes every time in five different sizes in the thinnest of leathers. Recommended for leather thickness of 1/2 oz. to 5 oz. |
Economy Rotary Punch - Leather Rotary Punch 3220-00 Our Best Seller for the budget minded! Pressed steel frame with six tubes that will fill most of your leathercraft needs at a price you can afford. Non-replaceable tubes. |
|
Universal Punch Tubes Fits the 323000 Professional Rotary Punch, 300300 Mini Punch Set and/or \3176700 Mini Punch Handle. Size 00, 1/64" 3231-00 Size 0, 5/64" 3231-10 Size 1, 3/32" 3231-11 Size 2, 1/8" 3231-12 Size 3, 9/64" 3231-13 Size 4, 5/32" 3231-14 Size 6, 3/16" 3231-16 |
Drive Punch High quality, study sharp steel drive punches. One piece tool automatically cleans punched leather out the side of the barrel so there\'s never any clogging. Size 0, 5/64" 3777-00 Size 1, 3/32" 3777-01 Size 2, 1/8" 3777-02 Size 4, 5/32" 3777-04 Size 6, 3/16" 3777-06 Size 7, 13/64" 3777-07 Size 9, 1/4" 3777-09 Size 12, 5/16" 3777-12 Size 14, 3/8" 3777-14 Size 16 1/2" 3777-16 Size 00, 1/16" 3777-33 |
|
Mini Punch Set 3003-00
Tubes are strong and durable. Sizes 0 through 5. Each set includes six interchangeable tempered steel tubes and forged steel handle. (Additional replacement tubes 3231--00, -10, -11, -12, -13, -14, -15, -16.) |
Maxi Punch Set 3004-00 Tempered, chromeplated steel handle. Larger tubes are used for grommets, eyelets, etc. Includes sizes 6 through 10 and 12. |
Craftool® Oval Leather Punches Measures 4-1/2" 3778-05 #5 1/8" X3/16 3778-07 #7 5/32" x 7/32" 3778-09 #9 3/16" x 1/4" |
Craftool® Diamond Hole Chisel Set 3009-00 Set includes one handle and ten interchangeable tips with diamond- shaped punches with 3/32" (2 mm), 1/8" (3 mm) and 5/32" (4 mm) spacing. |
Thonging Chisel Set 3008-00 Tempered, interchangeable steel blades make punching lacing slits easy. 1/16", 3/32" and 1/8". |
Craftool® Pocket Notch Punch 3781-00 Leather punch for notching out an area on your wallet interiors. Sharp punch makes custom wallet fabrication so much easier. This precision cut looks great and enables cards and ID to be pulled from the interior of a wallet with little effort. Always use on a proper cutting surface to prevent damage to the fine-edge blade. Measures 4-1/2" |
Craftool® Corner Round PunchesPrecision made corner punch to ensure a clean and uniform cut for your corners. Use on a proper cutting surface to prevent damage to the fine-edge blade. Blade is measured from point to point. Measures 4-1/2" 3780-00 Small 9/16" 3780-01 Medium 7/8" 3780-02 Large 1-1/8" |
English Point Strap End Punch 3/4" 3172-03 English Point Strap End Punches are hand forged with polished barrel and a tapered clearance. Used in the making of leather belts and straps. |
|
English Point Strap End Punch 1" 3172-04 English Point Strap End Punches are hand forged with polished barrel and a tapered clearance. Used in the making of leather belts and straps. |
English Point Strap End Punch 1-1/2" 3172-06 English Point Strap End Punches are hand forged with polished barrel and a tapered clearance. Used in the making of leather belts and straps. |
English Point Strap End Punch 1-3/4" 3172-07 English Point Strap End Punches are hand forged with polished barrel and a tapered clearance. Used in the making of leather belts and straps. |
Multi-Size Strap End Punch 3173-00
For a symmetrical and totally finished look. This punch will easily cut smooth, clean tips on all belts & straps up to 2" wide. |
Craftool® Round End Punches 3171-03 3/4" Slice out a round, centered end on your straps, belts and bags in one swift punch. Sturdy construction. Measures 5-3/4" |
Craftool® Round End Punches 3171-04 1" Slice out a round, centered end on your straps, belts and bags in one swift punch. Sturdy construction. Measures 5-3/4" |
Craftool® Round End Punches 3171-06 1-1/2" Slice out a round, centered end on your straps, belts and bags in one swift punch. Sturdy construction. Measures 5-3/4" |
Heavy Duty Oblong Punch 1/2" 3121-01 Hand-forged bag/oblong punches used by professional bag and strap manufactures. |
Heavy Duty Oblong Punch 3/4" 3121-03 Hand-forged bag/oblong punches used by professional bag and strap manufactures. |
Heavy Duty Oblong Punch 1" 3121-04 Hand-forged bag/oblong punches used by professional bag and strap manufactures. |
Heavy Duty Oblong Punch 1-1/2" 3121-08 Hand-forged bag/oblong punches used by professional bag and strap manufactures. |
A must for any project that requires a buckle. Punches oblong hole approx. 1/2" long and 1/8" wide. |
Oblong Punch 3/4" 31566-00 A must for any project that requires a buckle. Punches oblong hole approx. 3/4" long and 1/8" wide. |
Oblong Punch 1" 31567-00 A must for any project that requires a buckle. Punches oblong hole approx. 1" long and 1/8" wide. |
|
Top of the Page To order or for other information about the leather punches, please e-mail us at [email protected] or Call us at 818-342-9120 Monday Through Saturday 10am - 6pm |
|
Leather Setting Tools Setters and Anvils - Tools for setting leather hardware |
|
Mini Anvil 3101-00 Easy to mount to your work bench. A great base for setting rivets. |
Easy-To-Do Line 20 Snaps & Setter 3630-00 Twenty assorted snaps and two piece setting tool. |
Easy-To-Do Line 24 Snaps & Setter 3631-00 Twenty assorted snaps and two piece setting tool. |
Easy-To-Do Rivets & Setter 3635-00 Sixty assorted rivets and two piece setting tool. |
Dot/Rivet Anvil 8056-00 Anvil for Line 20 & 24 Snaps. |
Line 20 (Baby Dot Snaps) Snap Setter 8057-00 For line 20 fasteners |
Line 24 (Durable Dot Snaps) Snap Setter 8058-00 For line 24 fasteners. |
Domed Rivets. 8084-00 7 mm 8084-01 10 mm Use to properly set #11320- #11321 |
|
|
Eyelet Setter with Anvil 8095-00 1/4" (6 mm) Chrome-plated tools designed to set eyelets with ease. |
Grommet Setter with Anvil 8097-01 3/16" (5 mm) Precision made to set grommets easily. |
Grommet Setter with Anvil 8097-02 1/4" (6 mm) Precision made to set grommets easily. |
Grommet Setter with Anvil 8097-03 5/16" (8 mm) Precision made to set grommets easily. |
Grommet Setter with Anvil 8097-04 3/8" (10 mm) Precision made to set grommets easily. |
Tubular Rivet Penning Tool 8099-00 For 129400 Tubular Rivets. |
Rivet Setter 8100-00 For rapid rivets or crystal rivets. |
|
|
Wide Rivet Setter with Anvil 8100-11 Used to properly set #1371 through #1375 Wide Double Cap Rivets. |
|
|
Heavy Duty Line 20/24 Snap Setter 8104-00 Specially made for the proper setting of the stainless-steel Line 20/24 snaps. Two different sizes of interchangeable setting tips screw into included handle. Works best when used with #8056-00 Anvil.
|
Deluxe Snap-All/Rivet Setter Kit 8105-00 This is the best universal snap and rivet setter offered anywhere. Sets Multi Purpose Segma Type Fasteners 1250, Line 20 Fasteners 1261 (baby dot snaps), Line 24 Fasteners 1263 (Durable Dot Snaps), Rapid Rivets and Double Cap Rivets. |
Snap-All Setter Set 8108-10 Six pieces for setting glove snaps, segma type snaps, Line 20 Snaps and Line 24 Snaps (not for use on stainless-steel snaps). |
Craftool® Spike Setters 8109-00 Sets 1/2" (13 mm) spikes |
9 Copper Rivet & Burr Setter 8110-00 Sets 9 (thick) copper rivets. |
12 Copper Rivet & Burr Setter 8110-01 Sets 12 (medium) copper rivets |
Craftool® Spike Setters 8111-00 Sets 1-1/4" (32 mm) spikes |
Stud Anvil 8112-00 Base for setting 1309-00 Sam Browne Button studs. |
Round Spot Setters 8114-02 3/8" (10 mm) For properly setting #1330 Round Spots. |
Round Spot Setters 8114-01 1/4" (6 mm) For properly setting #1330 Round Spots. |
Magnetic Bag Clasp Setter 8115-00 Use to properly set #1299-20 and #1299-21 Magnetic Bag Clasps. |
Shotgun Shell Rivet Setter 8106-00 Use to set #1388-01 Shotgun Shell Rivets. |
Deluxe Snap/Rivet Anvil 8105-10 For use with the multi-purpose segma-type snaps, Line 20 snaps, Line 24 snaps, rapid rivets and all sizes of double cap rivets. This is the anvil only. Additional setting tools required. |
Anvil for Celtic Pyramid Rivets 8113-00 Use to properly set #11125- and #11126- Celtic Pyramid Rivets. |
To order or for other information about the leather hardware setters and anvils , please e-mail us at: [email protected] or
Call us at 818-342-9120 Monday Through Saturday 10am - 6pm Top |
To order or for other information about the tool racks and other leathercraft tools and supplies , please e-mail us at: [email protected] or
Call us at 818-342-9120 Monday Through Saturday 10am - 6pm
Top
Call us at 818-342-9120 Monday Through Saturday 10am - 6pm
Top
